Best answer: How do you create a solid from surfaces in CATIA v5?

How do I fill a surface in Catia?

Creating Fill Surfaces

  1. Click Fill in the Surfaces toolbar. …
  2. Select curves or surface edges to form a closed boundary. …
  3. Select the Continuity type to specify it between any selected support surfaces and the fill surface.

How do I join surfaces in Catia v5?

CATPart document.

  1. Click Join . …
  2. Select the surfaces or curves to be joined.
  3. You can edit the list of elements to be joined: …
  4. Right-click the elements from the list and choose the Check Selection contextual command. …
  5. Click Preview . …
  6. Click Cancel to return to the Join Definition dialog box.

How do you thicken the surface of Catia?

Creating a Thick Surface

  1. Select the surface you wish to thicken, that is the extrude element.
  2. Click Thick Surface . …
  3. Enter 10mm as the First Offset value and 6mm as the Second Offset value.
  4. Click More>> .
  5. Select the Smoothing mode under the Deviation parameters section. …
  6. Click OK .

How do you simplify the surface in Catia?

About selection:

  1. Select the product to you want to simplify (i.e. Product1) in the specification tree or in the geometry area.
  2. Click Simplification in the DMU Optimizer toolbar. …
  3. Enter the desired value in the Accuracy field for instance 5mm.
  4. Click Preview . …
  5. Click Save . …
  6. Click Save in the Save As dialog box.
  7. Click Close .
IT IS INTERESTING:  What is post processor in Ansys?

How do I add toolbars to Catia v5?

Create a Toolbar



In CATIA, select Tools >> Customize, pick the Toolbars tab then pick the New… button. 2. Select the new toolbar from the list, then pick Add Commands to add the TcIC commands available from the list.

How do I close open surface in Catia?

Creating Close Surface Features

  1. Select the surface to be closed, i.e. Trim. 3 .
  2. Click Close Surface . The Close Surface Definition dialog box is displayed.

How do you combine solids in Catia?

Right click on the body you want to be the main body and choose “define in work object”… then right click on the body you want to merge and choose “body obect” (at the bottom) then choose “add” if you need further help i can add screen shots if you would like.

How do I merge lines in Catia?

Creating Combined Curves

  1. Click Combine . …
  2. Choose the combine type: normal or along directions. …
  3. Successively select the two curves to be combined. …
  4. Click OK to create the element. …
  5. Successively select the two curves to be combined and a direction for each curve. …
  6. Click OK to create the element.

What is surface thickness?

The thickness of surface film is equal to range of intermolecular forces of that liquid.

Special Project