Best answer: How do I project a line in Solidworks?

How do you project a curve?

To project a curve:

1. Click Project Curve on the Curves toolbar, or Insert > Curve > Projected.
2. In the PropertyManager, under Selections, set Projection type to one of the following: Sketch on faces. Use this selection to project a sketched curve onto a model face. …
3. Click .

How do I project a point in Solidworks?

Click Point (Reference Geometry toolbar) or Insert > Reference Geometry > Point.

…

You can create reference points at the intersections of the following entities:

1. An axis and a plane.
2. An axis and a surface, both planar and non-planar.
3. Two axes.

How do I make a solid line in Solidworks?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

How do I project a line to a surface in Solidworks?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you use an intersection curve in Solidworks?

Sketching Intersection Curves



on the Sketch toolbar, or Tools > Sketch Tools > Intersection Curve. before selecting a plane). Select the intersecting items: Select a plane that intersects a face of the part.

What is projected view in Solidworks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

What is project curve?

In project management, an s-curve is a mathematical graph that depicts relevant cumulative data for a project—such as cost or man-hours—plotted against time.

How do you define a fillet in SolidWorks?

To create fillets:

1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
3. Click OK .

How do you offset a surface in SolidWorks?

Offset Surface

1. Click Offset Surface (Surfaces toolbar) or Insert > Surface > Offset.
2. In the PropertyManager: Select surfaces or faces in the graphics area for Surface or Faces to Offset . Set a value for Offset Distance. You can create an offset surface with a distance of zero. …
3. Click OK .

How do I convert entities in SolidWorks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .

How do you make a hidden line in SolidWorks?

Right-click the drawing view and select Properties. Select the Show Hidden Edges tab. Select a feature or component from either the drawing view or the FeatureManager design tree to add it to the list of items to be shown with hidden lines. Click Apply to see the effect of your selection.

How do you make a phantom line in SolidWorks?

First go to sketch, draw your line(s). Now right click in the grey part of the Command Manager and add the “Line Format” toolbar. Pick the line(s) you would like to make Phantom. Click the “Line Styles” Icon in the Line Format Toolbar and choose phantom.

How do you fix a line in SolidWorks?

To set a fixed length:

1. Select the spline to dimension.
2. Click Smart Dimension. …
3. Click anywhere on the spline to place the dimension and click. …
4. Drag an endpoint of the spline. …
5. To change the spline’s length, double-click the dimension and enter a new value in the Modify dialog box.